Glendale, AZ · Residential & commercial
No Work C of OName unconfirmed
7 of 8 sections written · last edit 2h ago
Fee
$25 initial license fee; $25 annual renewal fee
Registration process
Not confirmed yet
Not written yet · last edit 2h ago
Your company's copy
Build your process from this one
Copy these steps into a process that belongs to you and your company. Add the steps only your shop does and keep them private. Print it on your letterhead, and open it from anywhere with your company login.
Some steps here were written by AI from Glendale's own website and have not been checked by a contractor yet. Check them against your next permit and fix what is off.
Free. About a minute. Then you go straight to building your No Work C of O process.
Your copy stays yours. Contractors who pull this permit keep the public steps current. When one of them changes, your saved process does not change with it.
You decide what to take. We flag the change in your process and show you before and after. Take the update or keep what you have.
Name unconfirmed. The author was unsure of the official name.
Public city facts. Contractors with an account can suggest changes and confirm them.
Registration process · City-wide
Standing the jurisdiction requires before it issues anything: business license, state license on file, insurance and bond certificates, portal account.
AI draftSteps marked AI draft were written by AI from Glendale's own website and have not been checked by a contractor yet. Use the source link to check them, and fix anything that is off.
Obtain a Glendale Business License if operating a business location
AI draft · not checkedSource
A Glendale Business License is required for any person or business with a permanent physical business location in Glendale city limits, including at the Glendale Regional Airport. A separate license is needed for each separate location except commercial rentals. P.O. Box or PMB addresses are not accepted.
Fee $25 initial license fee; $25 annual renewal fee
Updated Sep 22, 2026
Pulled this permit recently?
Pre-approval process
Sign-offs required before application: zoning, HOA, historic, flood zone, fire marshal, health department.
City-wide for Glendale. Edit the city-wide section.
AI draftSteps marked AI draft were written by AI from Glendale's own website and have not been checked by a contractor yet. Use the source link to check them, and fix anything that is off.
Verify zoning before applying for a business license
AI draft · not checkedSource
Contact the Development Services Department, Planning & Zoning Division to verify the business location is zoned for the intended business activity before applying for a Glendale Business License.
Contact (623) 930-2800
Confirm if a Conditional Use Permit is needed for a home-based business
AI draft · not checkedSource
A Home Occupation conducted from a principal residence in a residential zoning district requires a Business License and may require a Conditional Use Permit. Review the Home-Based Business Questionnaire for details.
Contact (623) 930-2800
Confirm whether improvements require a building permit
AI draft · not checkedSource
Certain improvements may require a building permit. Contact the Building Safety Division to confirm if your improvements require a building permit.
Contact (623) 930-2800
Pulled this permit recently?
Design process
What must be submitted and who may prepare it: drawings, load calculations, engineered stamps, site plan.
City-wide for Glendale. Edit the city-wide section.
AI draftSteps marked AI draft were written by AI from Glendale's own website and have not been checked by a contractor yet. Use the source link to check them, and fix anything that is off.
Prepare construction drawings and calculations
AI draft · not checkedSource
The applicant must provide enough information to describe the project fully and clearly, including construction drawings and additional calculations and/or specs.
Pulled this permit recently?
Permit application process
Where to apply, the permit's name on the form, required fields and attachments, who may pull it, fees and payment.
AI draftSteps marked AI draft were written by AI from Glendale's own website and have not been checked by a contractor yet. Use the source link to check them, and fix anything that is off.
Submit Permit Application for No Work Certificate of Occupancy
AI draft · not checkedSource
If construction work is not anticipated or was not completed, submit a Permit Application for the No Work C of O with the future business name. Building and Fire Inspectors will perform field inspections to verify no work was needed or completed that would require permits.
Updated Sep 22, 2026
Pulled this permit recently?
Plan review process
Whether review is required, typical turnaround, the corrections and resubmittal loop, expedited options.
City-wide for Glendale. Edit the city-wide section.
AI draftSteps marked AI draft were written by AI from Glendale's own website and have not been checked by a contractor yet. Use the source link to check them, and fix anything that is off.
Drawings reviewed for zoning and building code compliance
AI draft · not checkedSource
Your drawings will be reviewed to check that they comply with the Zoning Ordinance and Building Codes. You may be asked to make corrections or provide additional information.
Review permit fee based on project size
AI draft · not checkedSource
The fee for a building permit depends on the type and size of your project. Usually the fee will be based on the square footage of the construction area.
Receive approved plan set
AI draft · not checkedSource
When the drawings are approved and the building permit is issued, you will be given one set of approved plans to keep on the job site.
Pulled this permit recently?
Utility process
Power, gas, water, sewer: disconnect and reconnect scheduling, meter release, clearance, lead times, contacts.
Inspection process
Required inspections in sequence, how to schedule, notice period and windows, re-inspection fees, what the inspector checks.
City-wide for Glendale. Edit the city-wide section.
AI draftSteps marked AI draft were written by AI from Glendale's own website and have not been checked by a contractor yet. Use the source link to check them, and fix anything that is off.
Schedule inspections by phone
AI draft · not checkedSource
Dial 623-915-3263 from a touch-tone phone. Press 1 to schedule an inspection. Enter the numeric portion of your permit number followed by the pound key (#). Enter the three-digit inspection code you wish to schedule. Verify the correct inspection type was spoken.
Contact 623-915-3263
Choose inspection date
AI draft · not checkedSource
Press 1 to schedule an inspection for the next business day (only if calling prior to 4:00 a.m.) or listen to the recorded message for further options to schedule a different day. Verify the correct inspection day is spoken.
Obtain confirmation number or schedule additional inspections
AI draft · not checkedSource
Press 1 to hear your confirmation number if this is the only inspection for the call, Press 2 to schedule another inspection on the same permit number, or Press 3 to schedule another inspection on a different permit number.
Reference inspection codes list
AI draft · not checkedSource
Use the published three-digit inspection codes for Building, Mechanical/Plumbing, Electrical, and Certificate of Occupancy inspections (for example 699 Final Inspection/Certificate of Occupancy, 688 Solar Panel, 199 Final/Structural).
Pulled this permit recently?
Close-out process
Final approval or certificate, permit expiration and extensions, revisions and change of scope, obtaining records.
City-wide for Glendale. Edit the city-wide section.
AI draftSteps marked AI draft were written by AI from Glendale's own website and have not been checked by a contractor yet. Use the source link to check them, and fix anything that is off.
Confirm fire/life safety inspection is current
AI draft · not checkedSource
As part of the license approval process, the Fire Department verifies the business location has a current (within 365 days) passing fire/life safety inspection conducted by the City of Glendale Fire Department.
Contact (623) 930-4400
Verify Certificate of Occupancy and closed building permits
AI draft · not checkedSource
Along with the Building Safety Division, the Fire Department will verify if the business location has a Certificate of Occupancy and if building permits have been closed.
Request Certificate of Occupancy after passing inspections
AI draft · not checkedSource
When you have passed all of your inspections, submit your request for the Certificate of Occupancy by sending an email to COORequest@glendaleaz.com and providing the Project Address and Building Permit #.
Pulled this permit recently?
Written by contractors, not by the City of Glendale. Permitpedia is not affiliated with or endorsed by any government agency. Confirm fees and requirements with the jurisdiction before you file.